You are bidding a 4 ports load balance and failover router.

Prolink MH8041

This is the Cheapest in eBay. Provide 1 year Warranty.

MH8021/MH8041 is a WAN load balance and failover router, also called multi-homing SOHO gateway. It provides 2 or 4 WAN port for ADSL or cable modem, can enjoy traffic load sharing & load balance of multiple ADSL/Cable link, in order to avoid single link failure risk. Supports ADSL, SDSL and ISDN.

We provide here is an Economic and Reliable Solution for load-balance applications. We also provided a FAQ for your interest.

Warranty: 1 year

1. all the traffics in the network will distribute equally to both SDSL line

2. If 1 SDSL down/faulty, it will not affect the internet access

3. Easy management

4. Cost saving...instead of SDSL, they can now convert to ADSL

 

Features and benefits

• Uplink Ethernet Port(WAN Port) - 4*10M/100M port (MH8041)- 2*10M/100M port (MH8021) auto-sensing and auto MDI/MDIX
• Downlink Ethernet Port (LAN port) - 1 *10 M/100 M auto-sensing and auto MDI/MDIX
• CPU ( Brecis ) - MIPS 4Km 150MHz
• Memory - Flash : 2M bytes- SDRAM : 16M bytes
• Configuration - Web based configuration for system
• Firmware upgrade - Upgraded by Ethernet or FTP server - Upgrade firmware in FTP site or your computer via Web management.- Use TFTP server running in PC to upgrade.
• Protocol Support - TCP/IP,UDP- ARP,BOOTP- ICMP- Routing Protocol- DHCP server/client- FTP,TFTP- Telnet- PPPoE
• Working mode - Router mode. fix ip. dynamic ip- Gateway mode. fix ip. dynamic ip . PPPoE- Basic NAT mode. fix ip. dynamic ip . PPPoE - work as router with 5 different LAN (MH8041) or 3 different LAN (MH8021)- all functions enable- all function except.IP packet filtering.DoS defense
• Security - DMZ Host- Multi NAT/NAPT- PAP/CHAP- Virtual Server Mapping support- Internet Access Controlpacket filtering base on . Port. Address Support - Net-meeting- Messenger- Real Audio- Cu-See-Me.
• VPN support -VPN pass-through support L2TP and IP Sec
• Load Balance Support - Session mode- Weight round robin mode- Traffic mode
• Routing support - Static Route - RIP I- RIP II
  MAC address clone - Support 4 WAN port (MH8041)- Support 2 WAN port (MH8021)
• Firewall - Defense attacks include DoS(Denial of Service) with active ports scan,- TCP SYNC flood- ICMP flood- IP source route opion detection- IP spoofing- Ping of death- IP fragment overlap- UDP flooding- PING oversize
• Other Function - Dynamic DNS support- SNTP support- E-MAIL alert- System Log
• LED Indicator - LAN- WAN1- WAN2- WAN3- WAN4
• Power port - Full Range switching power Input 110V ~ 220 AC adapter- Output 5V/2.8A External Power Adapter
• Temperature - 0 ~ 40 C (operation)- -10 ~ 60 C (storage)
• Humidity - 10 ~ 95% RH
• ESD - +- 4 KV
• Certifications - CE /FCC

 

We use Speedpost or DHL Global Mail for this shipment

 

Quick Understanding Router( FAQ)

u        General FAQ

Q1: How many WAN ports can I use with Router?

   We provide 2 WAN & 4 WAN, 2 kinds Load Balance Router.

 

Q2: What types of Internet Connection do you support?

   You can connect WAN port to ADSL modem or CABLE modem.

 

Q3: How do I configure my Router?

   Use Web Browser to configure router, follow the procedure in the manual

.

Q4: Do I require cooperation with my ISP?

   Only need to know the Username & password from the ISP and what kind

   Of IP address you have( fix IP or Dynamic IP)

 

u        Configure FAQ

Q1: Can I change Router administrator user name & password?

    User name can not be changed, you only can change password, maximum

    Character length for password can up to 30 with case sensitive

 

Q2: Default SW function is restore factory default value only?

    No, the switch function can be configured to perform following function.

   “Restore factory default value” or “Restore latest configuration file”.

 

Q3: How can I know Router system status & each interface activity if I want to know whether the configuration is correct or not?

    Using “Data Monitor” function, you can monitor router traffic status.

 

Q4: How to choose “working mode” when I start to configure router?

    This router provide 3 different working, depend what kind of software

    Function & throughput an meet your requirement.

 

u        User Management FAQ

Q1: Can I specific dedicate packet (by port number) through dedicate WAN port?

Yes, using “IP Binding” function when you set up router.

.Q2: Can I specific dedicate packet (by application /protocol) through dedicate WAN port?

Yes, using “Bandwidth Control” function when you set up router.

 

Q3: Can I specific dedicate packet (by IP address) through dedicate WAN port?

Yes, using “ QoS” function when you set up router.

 

Q4: Can I assign fix IP address to dedicated PC when I using HDCP?

Yes, using “Configure LAN & DHCP” function, you can assign fix IP address

To PC by match PC NIC card MAC address.

 

u        Bandwidth Management FAQ

Q1: How to limit FTP or other application bandwidth usage?

In “Bandwidth Usage” function, you can set bandwidth using by each application

 

Q2: Can I control bandwidth usage for each computer in my network?

Yes, in “QoS” function, allow you to control each PC bandwidth usage.

( future release)

 

u        Router Management FAQ

Q1: Can I check router status from Internet?

Yes, just enable router “remote configure” function.

 

Q2: What kind of data I can see from “Data Monitor” function?

You can see “real time packet” & “accumulated packet” for each port

 

Q3: How is link failure detected?

Enable “Health Check” function, router will detect ADSL link status.

 

Q4: How do I know when ADSL link has failed?

By “Mail Alert” function, router can send mail to administrator when

Detect critical condition.

 

u        Internet Access FAQ

Q1: What if I have different speed at ADSL link?

    There is no problem for Router to connect ADSL line with different speed

 

Q2: How to choose “Load Balancing “ working mode?

    If ADSL line have same speed, we suggest you to choose “session mode”.

    With different ADSL speed, you can use “Weight Round Robin” or

    “Traffic mode”

 

Q3: Can I connect Router WAN port to another device (Switch, router)?

    Yes, Router WAN port can be connect to another device, but need to point

    Out where is gateway address to let Router know

.

Q4: What happen, if I get multiple IP address from ISP?

    You can assign extra IP address to DMZ host or VoIP GW

 

Q5: Web site with SSL feature (Banking, Game Server) will not allow

    user access with multiple IP address, how to solve this issue?

    Using Router “IP Binding” function, let outgoing data packet to SSL

    Web Site will only use dedicated ADSL line.