Type of Camera: Single-lens reflex digital camera
	Effective Pixels: 10.2 million
	Image Sensor: RGB CCD, 23.6 x 15.8mm; total pixels: 10.75 million, Nikon DX format
	Image Size (pixels): 3,872 x 2,592 [L], 2,896 x 1,944 [M], 1,936 x 1,296 [S]
	ISO Sensitivity (Recommended Exposure Index): 100 to 1600 (ISO equivalent) in steps of 1/3 EV, plus HI-0.3, HI-0.7 and HI-1
	Storage Media: SD memory card
	Storage System: Compressed NEF (RAW): 12-bit compression, JPEG: JPEG baseline-compliant
	File System: Exif 2.21, Compliant DCF 2.0 and DPOF
	White Balance: Auto (TTL white balance with 420-pixel RGB sensor), six manual modes with fine-tuning, color temperature setting (Kelvin), preset white balance; white balance bracketing also available
	LCD Monitor: 2.5-in., 230,000-dot, low-temperature polysilicon TFT LCD with brightness adjustment allows up to 170-degree viewing angle.
	Playback Function: 1) Full frame 2) Thumbnail (4 or 9 segments) 3) Zoom 4) Slideshow (Standard or Pictmotion) 5) RGB histogram indication 6) Shooting data 7) Highlight point display 8) Auto image rotation
	Delete Function: Card format, All photographs delete, Selected photographs delete
	Video Output: Can be selected from NTSC and PAL
	Interface: USB 2.0 (Hi-speed) (mini-B connector); SD card slot: supports firmware updates via SD cards
	Compatible Lenses: Nikon F mount (with AF coupling and AF contacts)
	Text Input: Up to 36 characters of alphanumeric text input available with LCD monitor and multi-selector; stored in Exif header
	Picture Angle: Equivalent in 35mm [135] format is approx. 1.5 times lens focal length
	Viewfinder: Fixed eye-level pentaprism; built-in diopter adjustment (-2.0 to +1.0m-1)
	Eyepoint: 19.5mm (-1.0m-1)
	Focusing Screen: Type-B BriteView Clear Matte screen Mark II with superimposed focus brackets and On-Demand grid lines
	Viewfinder Frame Coverage: Approx. 95% (vertical and horizontal)
	Viewfinder Magnification: Approx. 0.94x with 50mm lens at infinity; -1.0m-1
	Viewfinder Information: Focus indications, Metering system, AE/FV lock indicator, Flash sync indicator, Shutter speed, Aperture value, Exposure/Exposure compensation indicator, ISO sensitivity, Exposure mode, Flash output level compensation, Exposure compensation, Number of remaining exposures
	Autofocus: TTL phase detection by Nikon Multi-CAM 1000 autofocus module with AF-assist illuminator (approx. 0.5m to 3.0m); Detection range: EV -1 to +19 (ISO 100 equivalent, at normal temperature: 20°C/68°F)
	Lens Servo: Instant single-servo (AF-S); continuous-servo (AF-C); auto AF-S/AF-C selection (AF-A); manual (M); predictive focus tracking automatically activated according to subject status in continuous-servo AF
	Focus Areas: 11 areas; any single area can be selected; center focus area can be switched from normal to wide-frame
	AF Area Modes: 1) Single Area AF: Focuses only on subjects in the selected area. Selection can be made from any one of the eleven AF spot sensors. 2) Dynamic Area AF: Focuses on subject in the selected area, but follows the subject if it moves from its original position, shifting instantly and automatically to the focus area into which the subject has moved. 3) Auto-area AF: measures all 11 focus areas, automatically determines which of them are on the primary subject, and activates only those areas.
	Focus Lock: Focus can be locked by pressing shutter-release button halfway (single-servo AF) or by pressing AE-L/AF-L button
	Exposure Metering System: Three-mode through-the-lens (TTL) exposure metering; 1) 3D Color Matrix Metering II (type G and D lenses); color matrix metering II (other CPU lenses); metering performed by 420-segment RGB sensor; 2) Center-weighted: Weight of 75% given to 6, 8, or 10mm diameter circle in center of frame; 3) Spot: Meters 3.5mm diameter circle (about 2.5% of frame) centered on active focus area (on center focus area when non-CPU lens is used, or if Auto-area AF is selected)
	Exposure Metering Range (ISO 100, f/1.4 lens, 20°C/68°F): 1) EV 0 to 20 (3D Color Matrix or center-weighted metering) 2) EV 2 to 20 (spot metering)
	Exposure Meter Coupling: CPU coupling
	Exposure Modes: Digital Vari-Program (Auto, Portrait, Landscape, Macro Close up, Sports, Night Landscape, Night Portrait); Programmed Auto [P] with flexible program; Shutter-Priority Auto [S]; Aperture Priority Auto [A]; Manual [M]
	Exposure Compensation: ±5 EV in increments of 1/3 or 1/2 EV
	Exposure Lock: Luminosity locked at detected value with AE-L/AF-L button
	Auto Exposure and Flash Bracketing: 2 to 3 exposures in increments between 1/3 to 2.0 EV
	Shooting Modes: 1) Single frame shooting mode; 2) Continuous shooting mode: approx. 3 frames per second; 3) Self-timer; 4) Delayed remote mode 5) Quick-response remote mode
	Shutter: Electronically-controlled vertical-travel focal plane shutter, 30 to 1/4000 sec. in steps of 1/3 or 1/2 EV, bulb
	Sync Contact: X-contact only; flash synchronization at up to 1/200 sec.
	Flash Control: 1) TTL: TTL flash control by 420-pixel RGB sensorBuilt-in Flash, SB-800, SB-600: i-TTL balanced fill-flash (except when using spot metering exposure mode), Built-in Flash, SB-800, SB-600: standard i-TTL flash (when using spot metering); 2) Auto aperture: Available with SB-800 with CPU lens 3) Non-TTL Auto: Available with Speedlights such as SB-800, 80DX, 28DX, 28, 27, and 22s 4) Range-priority manual; available with SB-800
	Flash Sync Mode: 1) Auto; 2) Fill-in flash 3) Red-eye Reduction 4) Red-eye Reduction with Slow Sync 5) SlowSync 6) Rear-curtain Sync; 7) Off
	Built-in Flash: (Auto, Portrait, Macro Close up, Night Portrait) auto flash with auto pop-up; Manual pop-up with button releaseGuide number (ISO 100, m/ft.): approx. 13/42
	Flash Compensation: -3 to +1 EV in increments of 1/3 or 1/2 EV
	Accessory Shoe: Standard ISO hot-shoe contact with safety lock provided
	Self-timer: Electronically controlled timer with 2 to 20 seconds duration (2, 5, 10, and 20 second selectable)
	Depth of Field Preview: When CPU lens is attached, lens aperture can be stopped down to value selected by user (A and M modes) or value selected by camera (P and S modes)
	Remote Control: Via MC-DC1 Remote Cord (optional) or ML-L3 Wireless Remote Control (optional)